Toyota Highlander 2020 Owner'S Manual Download Page 362

Page: 362 / 560

362

5-4. Using the storage features

HIGHLANDER_U



Front of console



Rear of console box (if

equipped)

■

Cable pass through (Instru-

ment panel)

The open tray is provided with a

hole that allows cables to be passed

through the tray from the USB port,

USB charging ports or power outlet.
Remove the cover.

WARNING

■

Items unsuitable for the open

tray

Observe the following precautions

when putting items in the open

tray. Failure to do so may cause

items to be thrown out of the tray

in the event of sudden braking or

steering. In these cases, the items

may interfere with pedal operation

or cause driver distraction, result-

ing in an accident.

●

Do not store items in the tray

that can easily shift or roll out.

●

Do not stack items in the tray

higher than the tray’s edge.

●

Do not put items in the tray that

may protrude over the tray’s

edge.

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Brands by name

Popular brands