manualshive.com logo in svg

Toyota Highlander 2020, Owner'S Manual

Share
Download
Toyota Highlander 2020 Owner'S Manual Download Page 468

468

7-2. Steps to take in an emergency

HIGHLANDER_U

2

Remove the center deck 
board.

3

Remove the cover.

If it is difficult to remove the cover, 
you can use your key.

4

Attach the adapter socket to 
the spare tire clamp bolt.

5

Connect the jack handle 
extension to the jack handle.

Check that the extension is locked 

in place by the button.

6

Connect the jack handle to 
the adapter socket. Turn the 
jack handle counterclock-
wise.

The tire will be lowered completely 
to the ground.

Turn the jack handle slowly to lower 
the spare tire. If the handle is 
turned quickly, the wire cable may 
slip off of the shaft inside the unit 
and the tire may not be lowered.

If the spare tire cannot be lowered: 

P.471

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands