manualshive.com logo in svg

Toyota Highlander 2020, Owner'S Manual

Share
Download
Toyota Highlander 2020 Owner'S Manual Download Page 277

277

4-5. Using the driving support systems

HIGHLANDER_U

4

Dr
iv

ing

equipped) and audio system 
screen depending on the posi-
tion and distance to the object.

Multi-information display and 
head-up display

Front corner sensor detection

Front center sensor detection

Rear corner sensor detection

Rear center sensor detection

Audio system screen (vehi-
cles with a Toyota parking 
assist monitor)

When the R shift lever is selected, 
a simplified image is displayed on 
the audio system screen.

Audio system screen (vehi-
cles with a Panoramic view 
monitor)

A graphic will be displayed on the 
audio system screen.

Use the meter control switches 
to enable/disable the intuitive 
parking assist. (

P.96)

1

Press  

or  

to 

select .

2

Press  

or  

to 

select  

and then press 

.

When the intuitive parking assist 
function is disabled, the intuitive 
parking assist OFF indicator 
(

P.76) illuminates.

To re-enable the system, select 

 on the multi-information dis-

play, select 

 and turn it on. If 

the system is disabled, it will 
remain off even if the engine 
switch is turned to ON after the 
engine switch has been turned 
off.

Turning intuitive parking 
assist on/off

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands