Toyota Highlander 2020 Page 8 Owner'S Manual Download

Page: 8 / 560

HIGHLANDER_U

for research purposes without

disclosing information about the

specific vehicle or vehicle owner

The SRS airbag and seat belt

pretensioner devices in your

Toyota contain explosive chemi-

cals. If the vehicle is scrapped

with the airbags and seat belt

pretensioners left as they are,

this may cause an accident such

as fire. Be sure to have the sys-

tems of the SRS airbag and seat

belt pretensioner removed and

disposed of by a qualified ser-

vice shop or by your Toyota

dealer before you scrap your

vehicle.

Special handling may apply, See

www.dtsc.ca.gov/hazard-

ouswaste/perchlorate.
Your vehicle has components

that may contain perchlorate.

These components may include

airbag, seat belt pretensioners,

and wireless remote control bat-

teries.

Scrapping of your Toyota

Perchlorate Material

WARNING

■

General precautions while

driving

Driving under the influence: Never

drive your vehicle when under the

influence of alcohol or drugs that

have impaired your ability to oper-

ate your vehicle. Alcohol and cer-

tain drugs delay reaction time,

impair judgment and reduce coor-

dination, which could lead to an

accident that could result in death

or serious injury.
Defensive driving: Always drive

defensively. Anticipate mistakes

that other drivers or pedestrians

might make and be ready to avoid

accidents.
Driver distraction: Always give

your full attention to driving. Any-

thing that distracts the driver, such

as adjusting controls, talking on a

cellular phone or reading can

result in a collision with resulting

death or serious injury to you,

your occupants or others.

■

General precaution regarding

children’s safety

Never leave children unattended

in the vehicle, and never allow

children to have or use the key.
Children may be able to start the

vehicle or shift the vehicle into

neutral. There is also a danger

that children may injure them-

selves by playing with the win-

dows, the moon roof or panoramic

moon roof, or other features of the

vehicle. In addition, heat build-up

or extremely cold temperatures

inside the vehicle can be fatal to

children.

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands