Toyota GR Supra 2022 Owner'S Manual Download Page 7

Page: 7 / 356

1-1. NOTES

NOTES

We recommend that you read

this publication thoroughly.
Detailed information about war-

ranty is listed in the "Owner's

Warranty Information Booklet"

or "Owner's Manual Supple-

ment".
Your vehicle has been specifi-

cally adapted and designed to

meet the particular operating

conditions and homologation

requirements in your country

and continental region in order

to deliver the full driving plea-

sure while the vehicle is oper-

ated under those conditions. If

you wish to operate your vehicle

in another country or region, you

may be required to adapt your

vehicle to meet different prevail-

ing operating conditions and

homologation requirements. You

should also be aware of any

applicable warranty limitations

or exclusions for such country or

region. In such case, please

contact your Toyota dealer for

further information.

Maintain the vehicle regularly to

sustain the road safety, opera-

tional reliability and the war-

ranty.
Specifications for required main-

tenance measures:



Maintenance system.



"Owner's Warranty Informa-

tion Booklet" or "Owner's

Manual Supplement".

If the vehicle is not maintained

according to these specifica-

tions, this could result in serious

damage to the vehicle. Such

damage is not covered by the

warranty.

Electronic control devices are

installed in the vehicle. Elec-

tronic control units process data

they receive from vehicle sen-

sors, self-generate or exchange

with each other. Some control

units are necessary for the vehi-

cle to function safely or provide

WARNING

Operating, servicing and main-

taining a passenger vehicle or

off-highway motor vehicle can

expose you to chemicals includ-

ing engine exhaust, carbon mon-

oxide, phthalates, and lead, which

are known to the State of Califor-

nia to cause cancer and birth

defects or other reproductive

harm. To minimize exposure,

avoid breathing exhaust, do not

idle the engine except as neces-

sary, service your vehicle in a

well-ventilated area and wear

gloves or wash your hands fre-

quently when servicing your vehi-

cle. For more information go to

www.P65Warnings.ca.gov/pas-

senger-vehicle.

Service and warranty

Maintenance

Data memory

General information

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands