Toyota GR Supra 2022 Owner'S Manual Download Page 49

Page: 49 / 356

3-1. CONTROLS

CON

TROLS

To clean the Control Display, fol-

low the care instructions, refer to

page 327.
In the case of very high tem-

peratures on the Control Dis-

play, for instance due to intense

solar radiation, the brightness

may be reduced down to com-

plete deactivation. Once the

temperature is reduced, for

instance through shade or air

conditioning, the normal func-

tions are restored.

The Control Display is switched

on automatically after unlocking.
In certain situations, the Control

Display is switched off automati-

cally, for instance if no operation

is performed on the vehicle for

several minutes.

The Control Display can also be

switched off manually.

Press the button.

"Turn off control display"

Press the Controller or any but-

ton on the Controller to switch it

back on again.

The buttons can be used to

open the menus directly. The

Controller can be used to select

menu items and enter the set-

tings.
Some Toyota Supra Command

functions can be operated using

the touchpad on the Controller,

refer to page 55.

• Turn to switch between menu

items, for example.

• Press to select a menu item,

Control Display

General information

Safety information

NOTICE

Objects in the area in the front of

the Control Display can shift and

damage the Control Display.

There is a risk of damage to prop-

erty. Do not place objects in the

area in front of the Control Dis-

play.

Switching on/off automati-

cally

Switching on/off manually

Controller with navigation

system

General information

Operation

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands