Toyota GR Supra 2022 Owner'S Manual Download Page 17

Page: 17 / 356

2-1. QUICK REFERENCE

QUICK REFER

ENCE



There are blind spots around

the vehicle which cannot be

seen from the driver’s seat.

Make sure to check the area

WARNING

If an object gets stuck behind the

brake pedal, braking may be

impossible and the accelerator

pedal may not return after being

depressed, leading to an

extremely dangerous situation.

WARNING

Make sure that the floor mats are

securely installed.

Make sure to only use genuine

Toyota floor mats which are

designed for this model and

secure them in place using the

provided fasteners. When the

floor mats have been removed,

such as when cleaning the vehi-

cle, make sure to securely install

the floor mats using the fasteners

before driving the vehicle.
If a floor mat which cannot be

installed securely, due to a dam-

aged fastener, etc., is used, it may

shift while driving and cover the

accelerator pedal, possibly

depressing it and causing an acci-

dent.
Additionally, never install two or

more floor mats on top of each

other. Not only will additional floor

mats interfere with normal opera-

tion of the pedals, but there is a

danger that a mat may curl behind

the brake pedal and prevent it

from being depressed.

WARNING

Be careful not to inhale exhaust

gases.

The exhaust includes colorless,

odorless carbon monoxide (CO).

Carbon monoxide (CO) can be

inhaled without noticing and in the

worst cases, can cause death.

Make sure to not allow the engine

to idle in a closed off garage or

other location with poor ventila-

tion.
If there is a hole or crack in the

exhaust system, caused by corro-

sion, etc., exhaust gasses may

enter the vehicle while driving. If

you smell exhaust gasses in the

vehicle, completely open all of the

windows and have the vehicle

inspected by Toyota dealer.

Confirm safety of sur-

roundings

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands