Toyota GR Supra 2022 Owner'S Manual Download Page 252

Page: 252 / 356

252

4-1. DRIVING TIPS

4-1.DRIVING TIPS

This chapter describes all stan-

dard, country-specific and

optional features offered with

the series. It also describes fea-

tures and functions that are not

necessarily available in your

vehicle, e.g., due to the selected

options or country versions. This

also applies to safety-related

functions and systems. When

using these functions and sys-

tems, the applicable laws and

regulations must be observed.

Moving parts need to begin

working together smoothly.
The following instructions will

help you to achieve a long vehi-

cle life and good efficiency.
During break-in, do not use the

Launch Control, refer to page

130.

Do not exceed the maximum

engine and road speed:



For gasoline engine 4,500

rpm and 100 mph/160 km/h.

Avoid full load or kickdown

under all circumstances.

The engine and vehicle speed

can gradually be increased.

Tire traction is not optimal due to

manufacturing circumstances

when tires are brand-new; they

achieve their full traction poten-

tial after a break-in time.
Drive conservatively for the first

200 miles/300 km.

Things to remember

when driving

Vehicle features and

options

Breaking-in period

General information

Safety information

WARNING

Due to new parts and compo-

nents, safety and driver assis-

tance systems can react with a

delay. There is a risk of an acci-

dent. After installing new parts or

with a new vehicle, drive conser-

vatively and intervene early if nec-

essary. Observe the break-in

procedures of the respective parts

and components.

Engine, transmission, and

axle drive

Up to 1,200 miles/2,000 km

From 1,200 miles/2,000 km

Tires

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands