Toyota GR Supra 2022 Owner'S Manual Download Page 113

Page: 113 / 356

113

3-1. CONTROLS

CON

TROLS

Before installing a child restraint

system in the front passenger

seat, make sure that the front,

knee and side airbags on the

front passenger side are deacti-

vated.
Deactivate the front-seat pas-

senger airbags automatically,

refer to page 170.

After installing a child restraint

system, move the front passen-

ger seat as far back as it will go

and, if possible, bring it up to

medium height. This seat posi-

tion and height ensure the best

possible position for the belt and

offers optimal protection in the

event of an accident.
If the upper anchor of the safety

belt is located in front of the belt

guide of the child seat, move the

front passenger seat carefully

forward until the best possible

belt guide position is reached.

Adjustable backrest width:

before installing a child restraint

system in the front passenger

seat, open the backrest width

completely. Do not change the

backrest width again and do not

call up a memory position.

The safety belt on the passen-

ger's side can be locked to fas-

ten child restraint systems.

Pull out the belt strap com-

pletely.

Secure the child restraint

system with the safety belt.

Allow the belt strap to be

pulled in and pull it tight

against the child restraint

system. The safety belt is

locked.

On the front passenger

seat

Deactivating airbags

WARNING

Active front-seat passenger air-

bags can injure a child in a child

restraint system when the airbags

are activated. There is a risk of

injury. Make sure that the

front-seat passenger airbags are

deactivated and that the PAS-

SENGER AIRBAG OFF indicator

light lights up.

Seat position and height

Backrest width

Child seat security

Locking the safety belt

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands