Toyota GR Supra 2022 Owner'S Manual Download Page 94

Page: 94 / 356

3-1. CONTROLS

• In duplex garages.

• During transport on trains car-

rying vehicles, at sea or on a

trailer.

• With animals in the vehicle.

• When the vehicle is locked

after start of fueling.

The tilt alarm sensor and the

interior motion sensor can be

switched off in such situations.

The indicator light lights up for

approx. 2 seconds and then

continues to flash.
The tilt alarm sensor and interior

motion sensor are switched off

until the vehicle is locked again.

• Unlock the vehicle with the

remote control.

• Unlock the vehicle with the

integrated key and activate

the drive-ready state via

emergency detection of the

vehicle key, refer to page 82.

• With Smart Key System:

when carrying the vehicle key,

grasp the driver’s door or front

passenger door handle com-

pletely.

The windows can be opened

with the vehicle key from the

outside as well as closed with

Smart Key System.
Additional information: Vehicle

key, refer to page 77.

The windows can be operated

under the following conditions.

• Standby state is established.

• Drive-ready state is activated.

Switching off the tilt alarm

sensor and interior motion

sensor

Press the button on the

remote control within 10

seconds as soon as the

vehicle is locked.

Switching off the alarm

Power windows

General information

Safety information

WARNING

When operating the windows,

body parts and objects can be

jammed. There is a risk of injury

or risk of damage to property.

Make sure that the area of move-

ment of the windows is clear

during opening and closing.

Overview

Power windows

Functional requirements

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands