Toyota GR Supra 2022 Owner'S Manual Download Page 112

Page: 112 / 356

112

3-1. CONTROLS

Pay attention to the specifica-

tions and the operating and

safety information of the child

restraint system manufacturer

when selecting, installing, and

using child restraint systems.

WARNING

The safety belt cannot be fas-

tened correctly on children shorter

than 5 ft, 150 cm without suitable

additional child restraint systems.

The efficacy of safety gear, includ-

ing safety belts, can be limited or

lost when safety belts are fas-

tened incorrectly. An incorrectly

fastened safety belt can cause

additional injuries, for instance in

the event of an accident or during

braking and evasive maneuvers.

There is a risk of injuries or dan-

ger to life. Secure children shorter

than 5 ft, 150 cm using suitable

child restraint systems.

Installing child restraint

systems

General information

Safety information

WARNING

The protective effect of child

restraint systems and their fasten-

ing systems which have been

damaged or exposed to an acci-

dent can be limited or lost. A child

cannot be properly restrained in

the event of an accident or brak-

ing and evasive maneuvers.

There is a risk of injuries or dan-

ger to life. Do not use child

restraint systems which have

been damaged or exposed to an

accident. If a child restraint sys-

tem and its fastening system has

been damaged or exposed to an

accident, have these systems

checked and replaced by your

Toyota dealer.

WARNING

The stability of the child restraint

system is limited or compromised

with incorrect seat adjustment or

improper installation of the child

seat. There is a risk of injuries or

danger to life. Make sure that the

child restraint system fits securely

against the backrest. If possible,

adjust the backrest tilt for all

affected backrests and correctly

adjust the seats. Make sure that

seats and backrests are securely

engaged or locked.

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands