Toyota GR Supra 2022 Owner'S Manual Download Page 322

Page: 322 / 356

322

5-1. MOBILITY

This chapter describes all stan-

dard, country-specific and

optional features offered with

the series. It also describes fea-

tures and functions that are not

necessarily available in your

vehicle, e.g., due to the selected

options or country versions. This

also applies to safety-related

functions and systems. When

using these functions and sys-

tems, the applicable laws and

regulations must be observed.

Regularly remove foreign

objects such as leaves in the

area below the windshield when

the hood is raised.
Wash your vehicle frequently,

particularly in winter. Intense

soiling and road salt can dam-

age the vehicle.



Maximum temperature: 140

°F/60 °C.



Minimum distance from sen-

sors, cameras, seals: 12 in/30

cm.

Care

Vehicle features and

options

Washing the vehicle

General information

Steam blaster and

high-pressure washer

Safety information

NOTICE

When cleaning with high-pressure

washers, components can be

damaged due to the pressure or

temperatures being too high.

There is a risk of damage to prop-

erty. Maintain sufficient distance

and do not spray too long continu-

ously. Follow the operating

instructions for the high-pressure

washer.

Distances and temperature

Automatic vehicle washes

Safety information

NOTICE

Water can penetrate in the wind-

shield area due to high-pressure

washers. There is a risk of dam-

age to property. Avoid high-pres-

sure washers.

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands