Toyota GR Supra 2022 Owner'S Manual Download Page 264

Page: 264 / 356

264

5-1. MOBILITY

This chapter describes all stan-

dard, country-specific and

optional features offered with

the series. It also describes fea-

tures and functions that are not

necessarily available in your

vehicle, e.g., due to the selected

options or country versions. This

also applies to safety-related

functions and systems. When

using these functions and sys-

tems, the applicable laws and

regulations must be observed.

The tire characteristics and tire

inflation pressure influence the

following:

• The service life of the tires.

• Road safety.

• Driving comfort.

• Fuel consumption.

The tire inflation pressure table,

refer to page 266, contains all

tire inflation pressure specifica-

tions for the specified tire sizes

at the ambient temperature. The

tire inflation pressure values

apply to tire sizes approved by

the manufacturer of the vehicle

for the vehicle type.
To identify the correct tire infla-

tion pressure, please note the

following:
If the tire's speed code cannot

be found, then the tire inflation

pressure for the corresponding

tire size applies.

• Tire sizes of your vehicle.

• Maximum permitted driving

speed.

Wheels and tires

Vehicle features and

options

Tire inflation pressure

General information

Safety information

WARNING

A tire with too little or no tire infla-

tion pressure may heat up signifi-

cantly and sustain damage. This

will have a negative impact on

aspects of handling, such as

steering and braking response.

There is a risk of an accident.

Regularly check the tire inflation

pressure, and correct it as

needed, for instance twice a

month and before a long trip.

Tire inflation pressure

specifications

In the tire inflation pressure

table

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands