Toyota GR Supra 2022 Owner'S Manual Download Page 299

Page: 299 / 356

299

5-1. MOBILITY

MOBILITY

ervoirs in the engine compart-
ment. Check and top up the
coolant levels on a regular
basis.

The coolant level is indicated
using the Max mark in the filler
neck of the coolant reservoir.

Additional information:

For an overview, refer to page
291.

Let the engine cool.

Open the hood, refer to page
292.

Turn the lid of the coolant
reservoir slightly counter-
clockwise to allow any
excess pressure to dissi-
pate, then open it.

Open the coolant reservoir
lid.

The coolant level is correct
when it is just below the max-
imum mark in the filler neck.

Close the cap.

Let the engine cool.

Open the hood, refer to page
292.

Turn the lid of the coolant
reservoir slightly counter-
clockwise to allow any
excess pressure to dissi-
pate, then open it.

Open the coolant reservoir
lid.

If the coolant is low, slowly
add coolant up to the speci-
fied level; do not overfill.

Close the cap.

Have the cause of the cool-
ant loss eliminated as soon
as possible.

Comply with the relevant envi-
ronmental protection regulations
when disposing of coolant and
coolant additives.

All washer nozzles are supplied
from one reservoir.

Use a mixture of tap water and
windshield washer concentrate.
If desired, a windshield washer

Checking the coolant level

Adding

Disposal

Washer fluid

General information

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands