Toyota GR Supra 2022 Owner'S Manual Download Page 146

Page: 146 / 356

146

3-1. CONTROLS

Press and hold the button on the
turn signal lever.

Information is displayed in the
instrument cluster. Pressing the
button repeatedly displays addi-
tional information.

The following information can be
displayed on the Onboard Com-
puter:



Miles and trip miles.



Current drivable range.



Consumption display.



Average consumption and
average speed.

For some information of the
Onboard Computer, it is possi-
ble to set whether it can be
called up in the instrument clus-
ter.

Via Toyota Supra Command:

"My vehicle"

"System settings"

"Displays"

"Instrument panel"

"Onboard info"

Select the desired setting.

■

Displaying/resetting miles

■

Display

■

Concept

The range indicates the dis-
tance that can still be covered
with the current fuel level.

■

General information

The estimated range available
with the remaining fuel is perma-
nently displayed in the instru-
ment cluster.

With a low remaining range, a
vehicle message is briefly dis-
played. With a sporty driving

Information at a glance

Adjusting information for
Onboard Computer

Information in detail

Odometer and trip odometer

• Press the knob to dis-

play the trip miles.

When the drive-ready
state is switched off,
miles and trip miles are
displayed.
• Keep the knob

pressed down to
reset the trip miles.

Current drivable range

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands