Toyota GR Supra 2022 Owner'S Manual Download Page 280

Page: 280 / 356

280

5-1. MOBILITY

Insert the connector into the

power socket inside the vehi-

cle.

Correct the tire inflation pres-

sure to at least 2.0 bar.

• Increase tire inflation pres-

sure: with standby state

switched on or the engine

running, switch on the com-

pressor.

• Reduce tire inflation pressure:

press the button on the com-

pressor.

Unscrew the connection

hose of the compressor from

the tire valve.

Pull the connector out of the

power socket inside the vehi-

cle.

Stow the Mobility System in

the vehicle.

Do not exceed the maximum

permissible speed of 50 mph/80

km/h
Reset the Tire Pressure Monitor

TPM, refer to page 280.
Replace the nonworking tire and

the sealant container of the

Mobility System promptly.

Tire chains cannot be mounted.

Snow tires should be used

instead.

The system monitors tire infla-

tion pressure in the four

mounted tires. The system

warns you if there is a loss of

pressure in one or more tires.

Sensors in the tire valves mea-

sure the tire inflation pressure

and tire temperature.
The system detects the

mounted tires automatically. The

system displays the specified

nominal pressure values on the

Control Display and compares

these values to the actual tire

Continuing the trip

Snow chains

NOTICE

■

Driving with tire chains

Do not fit tire chains. Tire chains

may damage the vehicle body

and suspension, and adversely

affect driving performance.

Selecting tire chains

Tire Pressure Monitor

TPM

Concept

General information

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands