Toyota GR Supra 2022 Owner'S Manual Download Page 122

Page: 122 / 356

122

3-1. CONTROLS

Lightly tap the lever up or down.
The triple turn signal duration

can be adjusted.
Via Toyota Supra Command:

"My Vehicle"

"Vehicle settings"

"Exterior lighting"

"One-touch turn signal"

Select the desired setting.

Press the lever to the resistance

point and hold it there for as

long as you want the turn signal

to flash.

Push the lever forward or pull it

backward.

High beams on, arrow

The high beams light up when the

low beams are switched on.

High beams off/headlight

flasher, arrow

Do not use the wipers if the

windshield is dry, as this may

damage the wiper blades or

cause them to become worn

more quickly.
The wipers can be operated in

the standby state.

Triple turn signal activa-

tion

Signaling briefly

High beams, headlight

flasher

Washer/wiper system

General information

Safety information

WARNING

If the wipers start moving in the

folded away state, body parts can

be jammed or damage may occur

to parts of the vehicle. There is a

risk of injury or risk of damage to

property. Make sure that the vehi-

cle is switched off when the wip-

ers are in the folded away state

and the wipers are folded in when

switching on.

NOTICE

If the wipers are frozen to the

windshield, the wiper blades can

be torn off and the wiper motor

can overheat when switching on.

There is a risk of damage to prop-

erty. Defrost the windshield prior

to switching the wipers on.

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands