Toyota GR Supra 2022 Owner'S Manual Download Page 319

Page: 319 / 356

319

5-1. MOBILITY

MOBILITY

order to allow the discharged bat-

tery to recharge.

Let both engines run for sev-

eral minutes.

Disconnect the jumper

cables in the reverse order.

Check the battery and recharge,

if needed.

The vehicle is not permitted to

be towed.

To remove a broken-down vehi-

cle from the danger area, it can

be pushed for a short distance.
For rolling or pushing the vehi-

cle, refer to page 128.

The vehicle should only be

transported on a loading plat-

form.

Switch on the hazard warning

system, depending on local reg-

ulations.

Tow-starting and towing

Safety information

WARNING

Due to system limits, individual

functions can malfunction during

tow-starting/towing with the Toy-

ota Supra Safety systems acti-

vated. There is a risk of an

accident. Switch all Toyota Supra

Safety systems off prior to

tow-starting/towing.

Transporting the vehicle

General information

Safety information

NOTICE

The vehicle can be damaged

when towing the vehicle with a

single lifted axle. There is a risk of

damage to property. The vehicle

should only be transported on a

loading platform.

NOTICE

The vehicle can become dam-

aged when lifting and securing it.
There is a risk of damage to prop-

erty.

●

Lift the vehicle using suitable

means.

●

Do not lift or secure the vehicle

by its tow fitting, body parts, or

suspension parts.

Pushing the vehicle

Tow truck

Towing other vehicles

General information

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands