Toyota GR Supra 2022 Owner'S Manual Download Page 111

Page: 111 / 356

111

3-1. CONTROLS

CON

TROLS

After using a child restraint sys-

tem on the front passenger seat,

ensure that the front, knee, and

side airbags on the front pas-

senger side are deactivated. For

automatic deactivation of front-

seat passenger airbags, refer to

page 170.

The right place for chil-

dren

Safety information

WARNING

Unattended children or animals in

the vehicle can cause the vehicle

to move and endanger them-

selves and traffic, for instance due

to the following actions:

●

Pressing the Start/Stop button.

●

Releasing the parking brake.

●

Opening and closing the doors

or windows.

●

Engaging selector lever position

●

Using vehicle equipment.

There is a risk of accidents or inju-

ries. Do not leave children or ani-

mals unattended in the vehicle.

Take the remote control with you

when exiting and lock the vehicle.

WARNING

A heated vehicle may result in

death to persons, especially chil-

dren and animals. There is a risk

of injuries or danger to life. Do not

leave persons, especially chil-

dren and animals unattended in

the vehicle.

WARNING

Exposure to intense sunlight can

cause child restraint systems and

their components to become very

hot. Persons may sustain burn

injuries when touching the hot

components. There is a risk of

injury. Do not expose the child

restraint system to direct sunlight

or cover where necessary. If nec-

essary, let the child restraint sys-

tem cool down before transporting

a child. Do not leave children

unattended in the vehicle.

Children on the front pas-

senger seat

General information

Safety information

WARNING

Active front-seat passenger air-

bags can injure a child in a child

restraint system when the airbags

are activated. There is a risk of

injury. Make sure that the

front-seat passenger airbags are

deactivated and that the PAS-

SENGER AIRBAG OFF indicator

light lights up.

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands