Toyota GR Supra 2022 Owner'S Manual Download Page 171

Page: 171 / 356

171

3-1. CONTROLS

CON

TROLS

When transporting older chil-

dren and adults, the front-seat

passenger airbags may be

deactivated in certain sitting

positions. In this case, the indi-

cator light for the front-seat pas-

senger airbags lights up.
In this case, change the sitting

position so that the front-seat

passenger airbags are acti-

vated and the indicator light

goes out.
If it is not possible to activate the

airbags, have the person sit in

the rear.
To enable correct recognition of

the occupied seat cushion.



Do not attach covers, cush-

ions, ball mats or other items

to the front passenger seat

unless they are specifically

determined to be safe for use

on the front passenger seat.



Do not place any electronic

devices on the front passen-

ger seat if a child restraint

system is to be installed on it.



Do not place objects under

the seat that could press

against the seat from below.



No moisture in or on the seat.

The indicator light for the

front-seat passenger airbag in

the roofliner indicates the oper-

ating state of the front-seat pas-

senger airbag.
The light indicates whether the

airbags are either activated or

deactivated.
After drive-ready state is

switched on, the light briefly

lights up and then indicates

whether the airbags are either

activated or deactivated.

Safety information

WARNING

To ensure the front-seat passen-

ger airbag function, the system

must be able to detect whether a

person is sitting in the front pas-

senger seat. The entire seat cush-

ion area must be used for this

purpose. There is a risk of injuries

or danger to life. Make sure that

the front passenger keeps his or

her feet in the floor area.

Malfunction of the auto-

matic deactivation system

Indicator light for the

front-seat passenger air-

bags

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands