Toyota GR Supra 2022 Owner'S Manual Download Page 295

Page: 295 / 356

295

5-1. MOBILITY

MOBILITY

The engine oil consumption can

increase in the following situa-

tions, for example:

• Sporty driving style.

• Break-in of the engine.

• Idling of the engine.

• With use of engine oil types

that are classified as not suit-

able.

Different vehicle messages

appear on the Control Display

depending on the engine oil

level.

The electronic oil measurement

has two measuring principles:

• Monitoring.

• Detailed measurement.

When making frequent

short-distance trips or using a

sporty driving style, for instance

when taking curves aggres-

sively, regularly perform a

detailed measurement.

■

Concept

The engine oil level is monitored

electronically while driving and

can be shown on the Control

Display.
If the engine oil level is outside

its permissible operating range,

a vehicle message is displayed.

A red indicator light indi-

cates that the engine oil pres-

sure is too low.

■

Functional requirements

A current measured value is

available after approx. 30 min-

utes of normal driving.

■

Displaying the engine oil

level

Via Toyota Supra Command:

"My Vehicle"

"Vehicle status"

"Engine oil level"

The engine oil level is displayed.

■

System limits

When making frequent

short-distance trips or using a

sporty driving style, it may not

be possible to calculate a mea-

Safety information

NOTICE

An engine oil level that is too low

causes engine damage. There is

a risk of damage to property.

Immediately add engine oil.

NOTICE

Too much engine oil can damage

the engine or the catalytic con-

verter. There is a risk of damage

to property. Do not add too much

engine oil. When too much engine

oil is added, have the engine oil

level corrected by your Toyota

dealer.

Electronic oil measure-

ment

General information

Monitoring

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands