E6581442
G-10
7
7.3
Setup of external speed command (analog signal)
Function of analog input terminals can be selected from four functions (external potentiometer, 0 to 10Vdc, 4 (0) to
20mAdc, -10 to +10Vdc). The selective function of analog input terminals gives system design flexibility.
Refer to Section 6.28 for fine adjustment of analog setting signal and output frequency.
[Control terminal board]
Setting of analog input terminal functions
Terminal
symbol
Title Function
Adjustment
range
Default
setting
-
Frequency priority selection
:
/
terminal
switching (input terminal
function selection
,
)
:
/
frequency switching
(switch by
)
VI/II input point 1 setting
~
%
VI/II input point 1 frequency
~
Hz
VI/II input point 2 setting
~
%
VI/II
VI/II input point 2 frequency
~
Hz
*1
-
Frequency setting mode selection 2
Same as
(
~
)
-
Speed command priority switching frequency
~
All
Analog input filter
(No filter)~
(Max. filter)
RR/S4 input point 1 setting
~
%
RR/S4 input point 1 frequency
~
Hz
RR/S4 input point 2 setting
~
%
RR/S4
RR/S4 input point 2 frequency
~
Hz
*1
RX input point 1 setting
-
~
%
RX input point 1 frequency
~
Hz
RX input point 2 setting
-
~
%
RX
RX input point 2 frequency
~
Hz
*1
~
AI1, AI2 input point setting
For details, see Instruction Manual
(E6581341) specified in Section 6.41.
Option
~
RP/high speed pulse input point setting
For details, see Instruction Manual
(E6581319) specified in Section 6.41.
*1:
Inverter with a model number ending with -WN1, HN: 60.0 -WP1: 50.0
Note 1: Input terminals of AI1 and AI2 are at expansion TB option unit.
Note 2: Input terminals of RP/high speed pulse is at PG feedback device option unit.
