Toshiba Strata AirLink DK40, Programming Manual

Page: 60 / 378

System & Station Program 02 Station Physical Port Display and/or Change
3-2
Strata DK40 Programming Manual Spring 1999
Program 02
Station Physical Port Display and/or Change
Program Type: Station
Initialised Default: Logical port number = physical port number
Program 90, 91-1, or 91-9 initialises Program 02
Program 02 Overview
Program 02 enables you to enter a logical port to display the associated physical port. You
then have the option to assign a new physical port to the logical port. (To return ports to their
initialised settings, see
Programs 90 and 91 .)
Notes
◆
Record port locations on Program 04 record sheet.
◆
The system allows only like ports to be reassigned (see below).
(QWHU 3URJ 0RGH 0 6SNU 3 5 +ROG 0 6SNU +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
Processor [PDN] Port Range
DK40 000~027
Allowed Not Allowed
Digital-to-Digital Ports (PDKU-PDKU Ports)
DSS, BGM or Amplified Conference Ports
should not be reassigned
Electronic-to-Electronic Ports (PEKU-PEKU Ports) Door Phone Ports should not be reassigned
Standard Tel to Standard Tel Ports (KSTU-PSTU-
RSTU)
Tie line Ports – should not be reassigned
PDKU to PEKU – cannot be exchanged
PSTU to PDKU – cannot be exchanged
PEKU to PSTU – cannot be exchanged
To Save existing Physical Port
6SNU
SELECT = Logical Port Number
The physical port number associated with the logical
telephone port displays after the logical port number
is entered.
Enter new Physical Port
to change existing Physical Port