Overview
How to Program a Strata DK40 System
1-16
Strata DK40 Programming Manual Spring 1999
Programming Data Variations
There are two different ways to enter data in Step 3 (
) of a program: pressing the
buttons on the dial pad and pressing the LED buttons. Many programs are multi-dimensional
and involve both types of entry.
Simple Programs
Simple programs such as Program 00, only require data to be specified through the dial pad.
Data entered from the dial pad displays on the programming digital or electronic telephone’s
LCD, along with prompts and confirmations.
Multi-dimensional Programs
Once a program number is entered, the first dimension (usually an Exchange line number, a
station port number, or a range of ports) must be specified. Upon specifying this first
dimension on the dial pad, programming button LEDs 01~20 light in the default
configuration.
The status of each LED can be changed by pressing its associated button. Pressing the button
while its LED is lit turns the LED OFF; pressing the button while its LED is OFF turns the
LED ON. An example of multi-dimensional programming is Program 30.
Range Programming
Data can be entered for a range of stations, [DN] reference ports and Exchange lines with
some programs.
➤
To enter a range
➤
Enter a “
----
” between the starting point of a range and the ending point of a range.
For example, to program the station range of 001~010 for Program 35, press
334
----
343
.
◆
When programming a range of station ports, the station’s programming LEDs indicate
whether the data programmed matches for all items in the range:
◆
LED ON: Indicates that all ports in the range are programmed with the data choice that
lights the particular LED.
◆
LED OFF: Indicates that all ports in the range are programmed with the data choice
that does not light the particular LED.
◆
LED Flashing: Indicates that data is currently inconsistent for all ports in the range.
Some may be programmed with the LED ON; some with the LED OFF.
Exchange Line Programming
Since the programming telephone only has 20 buttons, data can only be entered for 20
Exchange lines at a time.
➤
To program another range
➤
Press the
3DJH
or
6FUROO
button below the LCD.
For example, to change from one range to another in Program 15, enter the program
code, then press
6FUROO
to advance or
3DJH
to go back to another range.
◆
If the programming telephone is a digital telephone, all Exchange lines within a range
can be activated or deactivated for a feature by pressing the
9RO
▲
/
9RO
▼
buttons.
➤
Press
9RO
▲
to turn all LEDs ON; press
9RO
▼
button to turn all LEDs OFF.