manualshive.com logo in svg

Toshiba B-SX4T Series, Specification

Share
Download
Toshiba B-SX4T Series Specification Download Page 77

 

- 73 -

 

 

(3)  The Bit Map Font Format Command may be connected to the Outline Font Format 

Command when transmitted. 

 

 

 

 [ESC] P  C001; 0100, 0150, 1, 1, A, 00, B [LF] 
   

C002; 0350, 0180, 1, 1, A, 00, B [LF] 

   

C005; 0200, 0300, 25, 2, C, +05, 00, B, +0000000001 [LF] 

   

V01; 0500, 0400, 0100, 0100, A, 00, B [LF] [NUL] 

 

 

(4)  When the drawing data is changed per label issue during printing, the drawing 

data field for the previous label is automatically cleared using the character string 
number.  Then the next drawing data is printed.  Therefore, the character string 
number which differs according to the drawing fields should be designated.  Since 
the automatic field clear is not performed between the Clear Command ([ESC] C) 
and Issue Command ([ESC] XS), the fixed data may be drawn using the same 
character string number.  In this case, the Format Command and Data Command 
should be sent alternately.  (After the Issue Command is sent, the fields with the 
same character string number are automatically cleared until the Clear Command 
is sent.) 

 

 

(5)  The link field designation can be cleared by omitting the link field designation 

using the same character string No. and reformatting data. 

 

 

 

The link field designation can also be cleared by the Image Buffer Clear 
Command. 

 

 

(6)  A print data string and the link field No. cannot be programmed at the same time. 

 

Refer to 

Bit Map Font Data Command ([ESC] RC) 
Outline Font Format Command ([ESC] PV) 
Bar Code Format Command ([ESC] XB) 

Summary of Contents for B-SX4T Series























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands