manualshive.com logo in svg

Toshiba B-SX4T Series, Specification

Share
Download
Toshiba B-SX4T Series Specification Download Page 212

 

- 208 -

 

Notes 

(1)  No matter what character set or character code is selected, no memory will be 

wasted. 

 

 

(2)  When a new writable character is stored, the Flash Memory Format Command 

([ESC] J1) or the ATA Card Format Command ([ESC] JA) must be transmitted. 

 

 

(3)  A character code already stored can be stored in the flash memory card again if 

the Bit Map Writable Character Store Command ([ESC] XD) is transmitted, but 
memory will be consumed with every storage.    Memory can be efficiently used by 
sending the Flash Memory Format Command ([ESC] J1) before storing. 

 

 

(4)  If a flash memory card is used, and a label issue operation is performed after 

sending the Bit Map Writable Character Command ([ESC] XD), the image buffer is 
cleared automatically. 

 

 

(5)  When the storing operation is not continued after storing the writable character 

and logos, the printer automatically enters the online mode (label issue operation) 
after about 10 seconds.    In this case, when the flash memory card is used, the 
image buffer will be cleared automatically. 

 

 

(6)  Only a 4-MB flash memory card manufactured by Maxell can be used for storing a 

writable character. 

 

Refer to 

Flash Memory Format Command ([ESC] J1) 

 

 

ATA Card Format Command ([ESC] JA) 

Summary of Contents for B-SX4T Series























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands