manualshive.com logo in svg

Toshiba B-SX4T Series, Specification

Share
Download
Toshiba B-SX4T Series Specification Download Page 173

 

 

- 169 -

 

 

 

[C: Batch mode (Cut interval: 1, Issue count: 2)] 

 

 

 

•   “Automatic forward feed standby” is set to OFF in the system mode. 

 

 

 

• The rotary cutter is used. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1)  Idling (at the home position) 

A

A 

B

B

A 

B

Head position

Cut position

(2)  Completes printing the 1st label (A). 

(3) Starts printing the 2nd label (B). 

(4)  The 1st label (A) reaches the cut position 

and is cut. 

(5)  Completes printing the 2nd label (B). 

(6)  Feeds the 2nd label (B) to the cut position.

(7)  The 2nd label (B) reaches the cut position 

and is cut. 

B 

B 

(9)  Feeds back to the home position. 

(8)  Since non-stop cutting is performed, paper 

is fed and stopped over the cut position. 

Summary of Contents for B-SX4T Series























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands