Toshiba B-SX4T Series, Specification

Page: 184 / 374

- 180 -
6.3.15 FEED COMMAND [ESC] T
Function Feeds the paper.
Format [ESC] Tabcde [LF] [NUL]
Term a: Type of sensor
0: No sensor
1: Reflective sensor
2: Transmissive sensor (when using normal labels)
3: Transmissive sensor (when using preprinted labels)
4: Reflective sensor (when using a manual threshold value)
b: Selects cut or non-cut
0: Non-cut
1: Cut
c: Feed mode
C: Batch mode (Cut and feed when “1 (Cut)” is selected for parameter b.)
D: Strip mode
(with back feed)
E: Strip mode (with back feed, the strip sensor is ignored, the applicator
supports this mode.)
d: Feed speed
B-SX4T: B-SX5T:
3: 3 ips 3: 3 ips
6: 6 ips 5: 5 ips
A: 10 ips 8: 8 ips
e: With/without ribbon
0: Without ribbon
1: With ribbon (with ribbon saving function)
2: With ribbon (without ribbon saving function)
Explanation (1) Type of sensor
c
No sensor:
Feeding takes place according to the parameter designated by the Label Size
Set Command.
d Reflective sensor:
Feeding takes place according to the parameter designated by the Label Size
Set Command. However, the black mark provided on the back side of the tag
paper is automatically sensed by the reflective sensor and the stop position is
finely adjusted.
e Transmissive sensor (when using normal labels):
Feeding takes place according to the parameter designated by the Label Size
Set Command. However, the label-to-label gap is automatically sensed by the
transmissive sensor and the stop position is finely adjusted.