Toshiba B-SX4T Series Page 37 Specification Download

Page: 37 / 374

- 33 -

(2) Where the Saved Data Call Command is used:

NOTES:

(1) When placing new paper, the Feed Command must always be sent. When using the

same paper after the power is turned off and on, the Feed Command may be omitted.

(2) If the option for “automatic call at power on” for the Saved Data Call Command has

previously been selected, the Saved Data Call Command may be omitted after the
power is turned off and on.

(3) Where the XML data is used:

Print data in XML format can be sent to the printer.

* For details, refer to the XML Data Print Specification (TAA-1320).

Power ON

Bit Map Font Data Command

Yes

Place paper

Saved Data Call Command

[ESC] XQ: Calls the label format stored in the flash

memory card.

[ESC] XT: Calls the label format stored in the ATA

card.

[ESC] RC: Draws bit map font data.

Feed Command

[ESC] T: Feeds one sheet of paper and aligns it

with the first print position.

Outline Font Data Command

[ESC] RV: Draws outline font data.

Bar Code Data Command

[ESC] RB: Draws bar code data.

Issue Command

[ESC] XS: Issues (prints) the label.

Yes

Power OFF

Summary of Contents for B-SX4T Series























































































































































































































































































































































































Search results

Summary of Contents for B-SX4T Series

Reviews:

Related manuals for B-SX4T Series

Brands by name

Popular brands

Toshiba B-SX4T Series, Specification

Search results

Summary of Contents for B-SX4T Series

Reviews:

Related manuals for B-SX4T Series

Brands by name

Popular brands