Toshiba 8000 series User Manual Download Page 75

Page: 75 / 288

Part I: Getting to Know Your Computer

Hardware Features

Recording sounds with a microphone

Turn on the microphone. The internal microphone is
automatically disabled.

Once the external microphone is connected, the recording process
is the same as with the built-in microphone.

Using an external audio input device

You can also record sounds from an external audio device, such as
a stereo amplifier, tape deck, or CD player. To attach an external
line-in device:

Locate the line-in jack on the back of the computer.

Using any necessary adapters, plug the cord from the audio
device into the line-in jack.

The line-in jack

Once the external audio device is connected, the recording process
is the same as with the built-in microphone.

Summary of Contents for 8000 series

































































































































































































































































































Search results

Summary of Contents for 8000 series

Reviews:

Related manuals for 8000 series

Brands by name

Popular brands

Toshiba 8000 series, User Manual

Search results

Summary of Contents for 8000 series

Reviews:

Related manuals for 8000 series

Brands by name

Popular brands