Toshiba 8000 series, User Manual

Page: 158 / 288

Part I: Getting to Know Your Computer
Troubleshooting Guide
DVD operating problems–Windows 95/Windows 98
134
For Windows NT, make sure the Parallel Port Mode option in
System Setup is set correctly for your printer. If your printer is not
ECP-compatible, this option should be set to Std. Bi-Direct.
If your printer is ECP- or IEEE 1284-compliant, make sure you
have an IEEE 1284 printer cable.
Run the printer’s self test to check for any problem with the printer
itself.
Make sure you installed the proper printer drivers.
You may have connected the printer while the computer was
turned on. Disable Resume Mode (if appropriate), turn off the
computer, and turn off the printer. Turn the printer back on, make
sure it’s ready (on line), then turn the computer back on.
The printer doesn’t print what I see on the screen.
Many programs display information on the screen differently from
the way they print it. See if your program has a print preview
mode. This mode lets you see your work exactly as it will print.
Contact the software manufacturer for more information.
DVD operating problems–Windows 95/
Windows 98
If you experience a problem with your DVD Player, you may be
able to fix the problem yourself. The following section describes
some potential problems, and gives instructions for fixing them.
General problems playing a DVD title may be resolved by the
following steps:
1 Ensure that the drive is properly installed. It must be inserted
completely.
2 Ensure that the DVD-ROM disk is properly inserted in the
drive drawer.