TMP High Performance Vector Control Inverter User Manual
34
4.5 Panel Operation Method
4.5.1
Panel Operation Procedure
Parameter setting method via panel: through three-level menu, users can look
up and modify the function codes very easily.
Three level menu structure: function parameters (first level)
→
function
codes(second level)
→
value of function code(third level). Operation process is
shown in Fig.4-1.
Stop/run
first level
second level
third level
PRG
PRG
SET
PRG
PRG
SET
function codes set
Fig.4-1
Menu Operation Procedure
In the third level menu, user can return second level menu by pressing
PRG
key or
SET
key. The difference is: Parameter settings can be saved in control board if
SET
key
is pressed, then LED returns to second level menu and shifts to next function code
automatically; If user presses
PRG
key, LED returns to second level menu directly, but
the parameters can not be saved and stop at current function code.
4.5.2
Parameter setup
Setting parameters correctly is a premise for actualizingTMP’s performances.
Parameter setting method via panel will be introduced in the following part with rated
power as an example (Change 18.5kW into 7.5kW).
Operation process is shown in Fig.5-2. Press the
SHIFT
key with single direction
shifting function to shift the flashing bit of parameters (that is modification bit). After
finishing the parameters setup, press the
MENU
key twice to exit programing state.