TM TMP Series, Instruction Manual, Page: 36 / 137

TMP High Performance Vector Control Inverter User Manual
32
4.3 Description of Keys on Operation Panel
Symbol
Name Function
Analog type
Shuttle-type
Programming
key PRG
1
、
Switch between program and other states, which includes
parameters display and programming; In menu status, press
this key to return previous menu.
Function
Selection/Save
SET
1
、
In program status, press this key to enter next menu.
2
、
In menu level 3, press this key to save parameters value.
In
Decrease
−
Increase Key
∧
1
、
In first level menu, increase function code PX according to edit bit
2
、
In second level menu, increase the function code PX YZ data.
3
、
In third level menu ,Increase the function code data
Decrease
∨
1
、
In first level menu, decrease function code PX according to edit bit
2
、
In second level menu, decrease the function PX YZ code data
3
、
In third level menu ,decrease the function code data
Shift
>>
1
、
In third level menu
，
use key >> to shift edit bit of the data
2
、
In stop/run status, switch the panel display parameters such
as frequency, current and voltage.
Run Key
RUN
1
、
When running command is given via operation panel, the key is
used to control the start of inverter.
2
、
After setting the parameter auto tuning,start parameter auto tuning
for inverter startup
Stop/Reset
Key
STOP/RST
1
、
When running command is given via operation panel, the key is
used to control the stop of inverter.
2
、
When the inverter has fault and has stopped, this key is used as
RESET key to clear the fault alarm.
Multi-function
Key MF
0
：
Nonfunction
；
1
：
Reversal
JOG KEY
JOG
Press this key to start jog operation, release this key to stop the drive.