TMP High Performance Vector Control Inverter User Manual
18
Fig.
2−5
Removal of
lower cover
Fig.
2−6
Removal of
upper cover
Mounting of upper cover
After the wiring of main circuit terminals and control circuit terminals, insert the upper claw grab of
the upper cover into the groove of the inverter body, as shown in position 1 in Fig.2
−7, and then
press the lower part of the upper cover in direction 2 as shown in Fig.2
−7, until the “crack” sound is
heard.
Mounting of lower cover
Insert the upper claw grab on the lower cover into the groove of the upper cover, as shown in
position 1 of Fig.2
−8, and then press the lower part of the lower cover in direction 2 of Fig.2−8, until
the “crack” sound is heard. Now, tighten the cover screws.
Fig.2−7 Mounting of upper cover Fig.2−8 Mounting of lower cover’
Mounting of operation panel
Please refer to 2.3.1 Removal and mounting of operation panel.