TLS Omnia.9sg Preliminary Manual Download Page 4 | Manualshive

Page: 4 / 70

background image

4

USA CLASS A COMPUTING DEVICE INFORMATION TO USER. WARNING:

This equipment generates, uses, and can radiate radio-frequency energy. If it is not
installed and used as directed by this manual, it may cause interference to radio

communication. This equipment complies with the limits for a class a computing
device, as specified by fcc rules, part 15, subpart j, which are designed to provide
reasonable protection against such interference when this type of equipment is

operated in a commercial environment. Operation of this equipment in a residential
area is likely to cause interference. If it does, the user will be required to eliminate

the interference at the user’s expense. Note: objectionable interference to tv or radio
reception can occur if other devices are connected to this device without the use of
shielded interconnect cables. Fcc rules require the use of shielded cables.

CANADA WARNING:

“This digital apparatus does not exceed the class a limits for radio noise emissions
set out in the radio interference regulations of the Canadian department of

communications.”

“Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les

limites applicables aux appareils numériques (de class a) prescrites dans le
règlement sur le brouillage radioélectrique édicté par le ministère des

communications du Canada.”

CE CONFORMANCE INFORMATION:

This device complies with the requirements of the EEC council directives:

•

93/68/EEC (CE MARKING)

•

73/23/EEC (SAFETY – LOW VOLTAGE DIRECTIVE)

•

89/336/EEC (ELECTROMAGNETIC COMPATIBILITY)

Conformity is declared to those standards: EN50081-1, EN50082-1.

TRADEMARKS

Omnia Audio and the Omnia logo are trademarks of TLS Corp. All other trademarks
are the property of their respective holders.

NOTICE

All versions, claims of compatibility, trademarks, etc. of hardware and software

products not made by TLS Corp which are mentioned in this manual or
accompanying material are informational only. TLS Corp makes no endorsement of
any particular product for any purpose, nor claims any responsibility for operation

or accuracy. We reserve the right to make improvements or changes in the products
described in this manual which may affect the product specifications, or to revise
the manual without notice.

«
...
2
3
4
5
6
...
»

Summary of Contents for Omnia.9sg







































































Reviews:

No comments

Related manuals for Omnia.9sg

Brand: QFX Pages: 44

Brand: Kramer Pages: 14

Brand: Samlexpower Pages: 2

Brand: B&R Pages: 45

Brand: Wacker Neuson Pages: 36

Brand: Majella Pages: 6

Brand: LC Pages: 44

Brand: Caen ELS Pages: 52

Brand: AIMS Power Pages: 10

Brand: Moxa Technologies Pages: 2

Brand: Planet Pages: 63

Brand: Teleste Pages: 44

Brand: Diehl Pages: 28

Brand: Soarland & Hexin Pages: 2

Brand: Climax Pages: 2

HDMI Encoder 8x

Brand: NetUP Pages: 44

Brand: Bronson++ Pages: 50

Brand: Peak Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands