Thermo Finnigan SpectraSYSTEM UV6000LP, Reference Manual

Page: 37 / 137

January 2004 Thermo Electron 2-9
Connecting and Installing the Flowcell
The front of the detector (Figure 2.4) has a power switch at the lower
left and power on indicator light at the lower right. Access to the
flowcell is made through the removable front panel and bezel.
Enclosure Retaining Screws
(Recessed)
Power On
LED
P
D -
Z
00
5/
S
T
Power
Switch
1
Figure 2.4 Detector with front panel removed
The flowcell is packed in a small, separate box within the detector
shipping carton. This small box contains the flowcell (with protective
caps on each end) and a plastic bag containing the inlet and outlet
tubing and finger tight fittings.
Unpack the flowcell and install it as follows:
1. Remove the front cover of the detector by pulling out at the
bottom edge and lifting up.
2. Remove the flowcell cover by gently pulling the snap latch to
free the cover. Remove the retaining block knob and retaining
block (Figure 2.5).