Thermo Finnigan SpectraSYSTEM UV6000LP, Reference Manual

Page: 113 / 137

January 2004 Thermo Electron 6-5
“PM: Detach from dispatcher failed. You may have already been
detached.”
“PM: Queue deregistration failed.”
“PM: Queue destruction failed.”
“PM: Queue destruction failed, invalid queue.”
“PM: Receive returned null message. This could be critical. It may be
best to exit the software and/or cycle the power on the UV6000LP to
ensure future data integrity.”
“Attach: Requested com port does not match internal data. You may
have tried to connect to two different com ports in one session. Exit
and retry.”
“Attach: Could not attach because communications are already active.
If you have lost communications, please exit and reconnect.”
“Attach: Could not query UV6000LP version. You may have to exit
and reconnect. In some cases you may have to cycle power on the
detector.”
“Attach: Could not negotiate baud rate with UV6000LP. You may
have to exit and reconnect. In some cases you may cycle power on the
detector.”
“Attach: No response to version query was received for UV6000LP
ROM. You may have to exit and reconnect. In some cases you may
have to cycle power on the detector."
”Attach: No response to version query was received for UV6000LP
RAM. You may have to exit and reconnect. In some cases you may
have to cycle power on the detector.”
“Attach: Incorrect version was received.”
“Attach: The UV6000LP did not receive its startup signal (gp) from
the PC.”
“Reattach: Could not send version info to PC.”
“Reattach: Could not read startup message (gp).”
“Reattach: An invalid startup message was received.”
“Reattach: Could not echo startup message (gp).”
“Write: Could not transmit a packet header. Communications are
probably lost.”