Thermo Finnigan SpectraSYSTEM UV6000LP, Reference Manual

Page: 115 / 137

January 2004 Thermo Electron 6-7
CRASH ERROR
MESSAGES
Crash Error messages indicate a hardware or system failure has
occurred. Generally, Crash Error messages are associated with
system communication failures. Possible Crash Error messages
include:
“PM: Could not initialize MT! mem pool.”
“PM: Could not create Link Layer. See previous messages for more
information.”
“ PM: Queue registration failed.”
“PM: Queue creation failed.”
“PM: Failed to get message buffer. The UV6000LP has run out of
internal message buffers.”
“PM: Could not release a message buffer. This is a critical situation.
You should cycle power on your detector and reconnect to ensure
future data integrity.”
“Init: Exceeded number of allowed Link Layers. You may have tried
to connect to two different com ports in one session. Exit and retry.”
“Init: Creation of Physical Layer failed. Make sure the com port
exists and is available.”
“Init: Could not create Transmit queue. Please exit the application and
retry.”
“Init: Could not register Transmit Queue. Please exit the application
and retry.”
“Init: Creation of Queue Watcher failed. Please exit the application
and retry.”
“ Init: Creation of Writer failed. Please exit application and retry.”
“Init: Creation of Reader failed. Please exit application and retry.”
“Init: Creation of Timer failed. Please exit the application and retry.”
“Attach: Could not get a msg to finish the attach process. You may
have to exit and reconnect. In some cases you may have to cycle
power on the detector.”