Dionex Reagent-Free Controller
34
Doc. 031880-04 1/12
In the example in Figure 38, the
RFC Gradient
output is turned on at
2.00 minutes and turned off at 14.00 minutes.
Figure 38. DX-120 Timed Events Editor Example for Gradient Control
PeakNet 6 Gradient Program Example
This example shows how to add commands for controlling the Dionex
RFC
Gradient
TTL input to a PeakNet 6 program.
1. In PeakNet 6, open the program (PGM) file that will be used for
controlling the Dionex RFC, or create a new program.
2. Add two commands to the program. The first command turns on the
TTL (or relay) output that is connected to the Dionex RFC
Gradient
TTL input. The second command turns off the TTL (or relay) output.
Gradient on
Gradient off
