Thermo Scientific Dionex ICS-5000, Operator'S Manual

Page: 440 / 482

Dionex ICS-5000 Operator’s Manual
424
Doc. 065342-06 12/11
Flow Path Plumbing configurations for 4 mm, 2 mm, and
0.4 mm columns, fully inert, PEEK
Detectors Any combination of two conductivity or
electrochemical detectors, upgradeable and field
installable. Dual detectors can be operated
simultaneously or independently. Optional remote
operation up to 3 m from instrument
Analog Signal Output Two analog output channels, two 24 V relays, two
TTL Out and eight TTL In lines, upgradeable and
field installable, optional
Leak Detection Optical leak sensor standard
Application Control
Automation Yes, standard. All DC modules come equipped with
two switched AC controllers built-in to automate
external devices and the ability to control up to six
low-pressure 2-way or 3-way valves for fluidic
automation
Suppression
Non -suppressed
conductivity Yes, supported
Suppressor wear parts None. No valves, pumps, peristaltic pump tubin,g
or inline filters required
Chemical Suppression 2 mm and 4 mm anion and cation membrane
suppression available
Displacement Chemical
Suppression 2 mm and 4 mm anion and cation membrane
suppression available
Electrolytic Suppression,
Self-Regenerating. 0.4 mm (with optional IC Cube), 2 mm and 4 mm
anion and cation. Membrane and MonoDisc
suppression bed types available. Membrane for
capillary (0.4 mm) suppressor.
Electrolytic Suppression,
Self-Regenerating,
External Water Mode 0.4 mm (with optional IC Cube), 2 mm and 4 mm
anion and cation. Membrane and MonoDisc
suppression bed types available for 2 mm and
4 mm. Membrane for capillary (0.4 mm)
suppressor.
Salt Converter Available in 2 mm and 4 mm versions
AMMS-ICE Available in 2 mm and 4 mm versions
Dionex ICS-5000 DC Detector/Chromatography Compartment Specifications