Thermo Scientific Dionex ICS-5000, Operator'S Manual

Page: 110 / 482

Dionex ICS-5000 Operator’s Manual
94
Doc. 065342-06 12/11
2.18 Automation Manager
The Dionex ICS-5000 Automation Manager (AM) provides a mounting
location for various components used for performing matrix elimination, large
volume pre-concentration, post-column reagent addition, and other functions.
Each AM consists of a tray on which valves and other components are
installed (see
Figure 2-39 ). The tray is installed in the upper compartment of
the DC (see Figure 2-21 ). Connections to other components in the system
(pump, injection valve, reagent reservoirs, etc.) depend on the application.
Refer to
Chapter 3 for the configuration schematic for your application.
NOTE
Because the AM requires the full width of the DC upper com-
partment, an IC Cube cannot be installed in the DC when an
AM is installed.e AM is available in the following configura-
tions:
Figure 2-39. Dionex ICS-5000 Automation Manager
Components Included Part Number
Two 10-port high-pressure valves
Two low-pressure 3-way valves 061738
One 10-port high-pressure valve
One low-pressure 3-way valve 061736
Figure 2-40. AM Configurations
RCH-1
Reaction Coil
Low-Pressure
Valve #1 Low-Pressure
Valve #2 Temperature
Stabilizer
High-Pressure
Valve #1 High-Pressure
Valve #2