Thermo Scientific Dionex ICS-5000, Operator'S Manual

Page: 376 / 482

Dionex ICS-5000 Operator’s Manual
360
Doc. 065342-06 12/11
Table 9-7 lists the tubing and fittings in the IC Cube Tubing Kit (P/N 072186)
Part Length/
Quantity Part
Number Used To Connect…
Precision cut 0.062 mm
(0.0025 in) ID PEEK
tubing, blue 65 mm
(2.56 in) 072188 50 mm guard column
outlet to 250 mm
separator column inlet
Precision cut 0.062 mm
(0.0025 in) ID PEEK
tubing, blue, labeled
VALVE PORT 3
115 mm
(4.53 in) 072189 Guard column inlet to
injection valve
Precision cut 0.062 mm
(0.0025 in) ID PEEK
tubing, blue 75 mm
(2.93 in) 074603 35 mm guard column
outlet to 150 mm
separator column inlet
Precision cut 0.062 mm
(0.0025 in) ID PEEK
tubing, blue, labeled
VALVE PORT 3
210 mm
(8.27 in) 072187 Separator column inlet to
injection valve (if a guard
column is not present)
0.25 mm (0.010 in) ID
PEEK tubing, black 610 mm
(24 in) 042690 EG degas cartridge
REGEN OUT to waste (if
an EG is not present)
0.125 mm (0.005 in) ID
PEEK tubing, red 610 mm
(24 in) 044221 Inject valve waste to AS
waste
High-pressure 10-32
fitting bolt, blue 7 074449 • EG degas cartridge
ELUENT OUT to
injection valve
• Injection valve to guard
or separator column
• Guard column to
separator column
• Separator column to
suppressor
High-pressure 10-32
ferrule, double-cone,
blue 7 074373 Use with high-pressure
fitting bolts
Table 9-7. Contents of the IC Cube Tubing Kit (P/N 072186)
Capillary
IC