Thermo Scientific Dionex ICS-5000, Operator'S Manual

Page: 350 / 482

Dionex ICS-5000 Operator’s Manual
334
Doc. 065342-06 12/11
Notes for capillary IC channels:
•
Do not cut the 0.062 mm (0.0025 in) ID blue PEEK tubing used for
capillary IC connections. This tubing must be cut at the factory using a
specialized precision cutter. This ensures good chromatographic results. If
you need to replace any tubing of this type, order the appropriate
precision cut tubing assembly listed in
Table 9-3 .
•
When replacing capillary tubing, make sure the ferrule and fitting bolt are
at least 2 mm (0.1 in) from the end of the tubing before you insert the
tubing into the port. Do not position the ferrule and fitting bolt flush with
the end of the tubing. For detailed connection instructions, see
Section 9.1 .
•
For tightening requirements for the high-pressure fitting bolt
(P/N 074449) and ferrule (P/N 074373), see
Section 9.2 .
•
For tightening requirements for the 10-32 fitting bolt (P/N 043275) and
ferrule (P/N 043276), refer to
Installation of Dionex Liquid Line Fittings
(Document No. 031432). The manual is on the Thermo Scientific
Reference Library DVD (P/N 053891).
10-32 fitting bolt
10-32 ferrule, double-
cone Black 043275
043276 All other tubing connections
Tubing/Fitting Size
and Type Color P/N Use to connect…
Table 9-3. Tubing and Fittings for a Capillary IC EG Channel
Capillary
IC