Thermo Scientific DCT6088 User Manual Download | Manualshive

Page: 86 / 121

background image

Maintenance & Troubleshooting

Warranty

7-6

DCT6088 User Guide

Thermo Fisher Scientific

Thermo Scientific products are warranted to be free from defects in
material and workmanship at the time of shipment and for one year
thereafter. Any claimed defects in Thermo Scientific products must be
reported within the warranty period. Thermo Fisher Scientific shall have
the right to inspect such products at Buyer’s plant or to require Buyer to
return such products to Thermo Fisher plant.

Warranty

In the event Thermo Fisher requests return of its products, Buyer shall ship
with transportation charges paid by the Buyer to Thermo Fisher plant.
Shipment of repaired or replacement goods from Thermo Fisher plant shall
be F.O.B. Thermo Fisher plant. A quotation of proposed work will be sent
to the customer. Thermo Fisher shall be liable only to replace or repair, at
its option, free of charge, products which are found by Thermo Fisher to be
defective in material or workmanship, and which are reported to Thermo
Fisher within the warranty period as provided above. This right to
replacement shall be Buyer’s exclusive remedy against Thermo Fisher.

Thermo Fisher shall not be liable for labor charges or other losses or
damages of any kind or description, including but not limited to,
incidental, special or consequential damages caused by defective products.
This warranty shall be void if recommendations provided by Thermo
Fisher or its Sales Representatives are not followed concerning methods of
operation, usage and storage or exposure to harsh conditions.

Materials and/or products furnished to Thermo Fisher by other suppliers
shall carry no warranty except such suppliers’ warranties as to materials and
workmanship. Thermo Fisher disclaims all warranties, expressed or
implied, with respect to such products.

EXCEPT AS OTHERWISE AGREED TO IN WRITING BY Thermo
Fisher, THE WARRANTIES GIVEN ABOVE ARE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND Thermo
Fisher HEREBY DISCLAIMS ALL OTHER WARRANTIES,
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS
FOR PURPOSE.

«
...
84
85
86
87
88
...
»

Summary of Contents for DCT6088


























































































































Reviews:

No comments

Related manuals for DCT6088

Brand: Campbell Pages: 25

Brand: Larson Davis Pages: 2

Brand: G-Tek Pages: 27

Brand: Datalogic Pages: 6

Brand: Datakom Pages: 4

Brand: Datakom Pages: 38

Brand: Vaisala Pages: 2

Brand: OBD Pages: 5

micro-TRI-gloss ?

Brand: BYK Pages: 174

Brand: Aqualytic Pages: 130

Brand: B meters Pages: 3

Brand: Zhengzhou Minghe Electronic Technology Pages: 7

Brand: Omega Pages: 13

Friendly Digital Piano Forte PV35

Brand: Kawai Pages: 102

Brand: Heyuan Intelligence Pages: 14

Brand: WAGNER Pages: 4

Brand: VOLTCRAFT Pages: 4

WPA Lightwave S2000

Brand: biochrom Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands