Thermo Scientific DCT6088, User Manual

Page: 47 / 121

Operating & Configuring the Flowmeter
Quick Setup Configuration
Figure 4–6. Pipe OD menu
If you know the pipe circumference but not the OD, enter the
circumference value instead and press
ENTER and the down
arrow. The screen shown in Figure 4–7 is displayed. Select Circum .
The flowmeter will calculate the pipe OD automatically.
Figure 4–7. Pipe OD type options
b. Select the Pipe ID setup menu (12), and enter the pipe ID. Press
Enter .
Figure 4–8. Pipe ID setup menu
c. Select the Pipe Material setup menu (13). Press the up or down
arrow to scroll through the available options.
Note
Select OTHER if the material is not listed. You must then
enter the pipe sound speed (14) and pipe inside roughness (15). ▲
Figure 4–9. Pipe Material setup menu
Note Refer to “The Pipe Menu” (Chapter 5) for additional items not
addressed in the quick setup procedure. ▲
3. If there is a liner, continue with this step. Otherwise, skip to step 4.
a. Access the Liner Material setup menu (16). The screen shown in
Figure 4–10 is shown. Select one of the available options.
Thermo Fisher Scientific DCT6088 User Guide 4-7