Thermo Scientific DCT6088, User Manual

Page: 61 / 121

Primary Displays & Menus
Options Menu
Note Disable the system password function by entering 0 (zero) as the
system password. Enable the function by changing the password back
to anon-zero number.
▲
Enter the old system password and press Enter . If the old system
password is correctly entered, the software will display that the
password is accepted (Figure 5–31). If the password is incorrectly
entered, it will display that the entry is rejected (Figure 5–32).
Figure 5–31.
Figure 5–32.
Note After the system password is accepted or rejected, the Change
Scale Factor Password setup menu is displayed, which allows you to
change the scale factor password.
▲
Access menu 00 to lock the system with the new password.
●
Change Scale Factor Password setup menu (48)
Use this menu to change the scale factor password which is designed to
protect the scale factor from unauthorized or accidental changes. The
flowmeter ships from the factory with the scale factor password
disabled. If the scale factor password is enabled, the flowmeter requests
the password whenever a user attempts to change the scale factor.
To change or disable the scale factor password, access the Change Scale
Factor Password setup menu. Enter the new scale factor password and
press
Enter .
Figure 5–33. Change Scale Factor Password setup menu
Thermo Fisher Scientific DCT6088 User Guide 5-11