Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual Download

Page: 46 / 242

Phase

Steps that occur

When you link:

• You use an option described in “Link the instrument to your Connect cloud-based

platform account“ on page 136 to link.

• If this is the first time you link, a Connect platform instrument and a local

instrument profile (with standard role) are created with the same name using the

FirstNameLastInitial of the user name from your thermofisher.com account.
Example:

[email protected] First name is User, Last name is Gray.

Connect platform account username is

User G.

• Your local instrument profile (

User G.) is linked to your Connect platform account

(

[email protected]).

• Your Connect platform instrument profile (

User G.) replaces your local instrument

profile.

After you link:

• Your Connect platform instrument profile (

User G.) and is displayed in the

home screen of the instrument.

• Plates and results from your local instrument profile can be copied to the Connect

platform (see “Export results from the instrument (sample data files and QC

reports)“ on page 121).

• New plates and results are saved under your Connect platform instrument profile.
• Your Connect platform instrument profile name (

User G. ) is available for

selection in the Sign In screen.

If your Connect platform

account is unlinked:

• Your local instrument profile (

User G.) is displayed in the home screen of the

instrument.

• Plates and results that were saved under your Connect platform instrument

profile are accessible under your local instrument profile.

• New plates and results are saved under local instrument profile and can be copied

to the Connect platform (see “Export results from the instrument (sample data

files and QC reports)“ on page 121).

• Your local instrument profile name (

User G.) is available for selection in the Sign In

screen.

IMPORTANT!

If you sign in with a local profile, without linking to the Connect

cloud-based platform, sign out, then link using Get Started

Connect, you can

potentially have two local instrument profiles with different names. Plates are results

created when you are signed in with one local instrument profile are not accessible

when you are signed in with the other local instrument profile.

Chapter 3

Use the instrument with the Connect cloud-based platform

Understanding instrument and Connect cloud-based platform interaction

SeqStudio

™

Genetic Analyzer Instrument and Software User Guide

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer



















































































































































































































































Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands

Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer, User Manual

Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands