Export results from the instrument (sample data files and QC
reports)
In the home screen:
1.
Touch Settings
4
Run history.
2.
Select one or more plates from the Run History table.
3.
Touch Export.
4.
Select a storage location.
The following data is exported for the plate:
• Fragment/HID analysis—FSA file for each sample.
• Sequencing—AB1 file for each sample.
• Plate QC report in CSV and PDF format.
Note:
If you select a plate, select View, then select Export, only an FSA or AB1 file for
each analyzed sample is exported.
Analyze data
1.
Export results (see “Export results from the instrument (sample data files and QC
reports)“ on page 121) or use auto exported data.
2.
Use an appropriate fragment analysis or sequencing application to analyze the
data.
Note:
Data from the SeqStudio
™
Genetic Analyzer may be labeled as "3200" in
secondary analysis software.
For more information, see “Secondary analysis software“ on page 29
Chapter 8
View and analyze results
Export results from the instrument (sample data files and QC reports)
8
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide
121
