Sample name to "Test" for well E1, the Sample name for well A1 is also changed
to "Test".
4.
(Fragment/HID analysis only) Select the Sample type for each well: Allelic ladder,
Negative control, Positive control, or Sample.
5.
(Fragment/HID analysis only) Select a size standard for the selected injection
groups.
6.
(HID analysis only) Select a kit for the selected injection groups (enables marker-
to-marker pull-up reduction).
7.
Select a Dye set for the selected injection groups.
8.
Select a Run module for the selected injection groups.
Note:
Run module 1 is used for the first injection you specify. If you specify
replicate injections, additional run module fields are added. For information, see
“Specify replicate injections“ on page 87.
For more information, see “Run modules, read lengths, size ranges, and run
9.
Click Next and proceed to “Save a plate setup in the Plate Manager“ on page 73.
Keyboard shortcuts for the sample table
Keys
Action
Navigation
Arrow keys
Move to the cell above, below, to the right, or to the left of the current cell.
Tab
Move to the cell to the right of the current cell.
Shift+Tab
Move to the cell to the left of the current cell.
Home
Move to the first cell in the row.
End
Move to the last cell in the row.
Ctrl+Home
Move to the first cell in the column.
Ctrl+ End
Move to the last cell in the column.
Selection
Ctrl+A
Select all.
Shift+Arrow keys
Extend the selection of the cell above, below, to the right, or to the left of the current
cell.
Shift+Home
Select all cells in the row to the right including the current cell.
Shift+End
Select all cells in the row to the left including the current cell.
Ctrl+Shift+Home
Select all cells in the column to the top cell including the current cell.
Chapter 5
Create or modify a plate setup from the Plate Manager
Set up a plate using default settings (Plate Manager)
5
72
SeqStudio
™
Genetic Analyzer Instrument and Software User Guide
