Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual Download

Page: 74 / 242

Click Save.

Note:

The Monitor my run button is available only in the Connect cloud-based

platform app.

If you are running the Plate

Manager on the...

The plate setup is saved as a...

Connect cloud-based platform

Plate setup that you can open from the Connect

cloud-based platform and run on the instrument.

Desktop

PSM file that you can open from a network drive

or a USB and run on the instrument.

Proceed to Chapter 7, “Start and monitor a run“.

Additional plate settings (Plate Manager)

In the Plate screen:

Select Actions

Add injection.

Select one or more injection groups, then select a run module for the replicate

injections.
You can add up to 5 replicate injections (for a total of 6 injections). Run module 1

is used for the first injection you specify. Additional run module fields are added

for replicate injections.

To remove a replicate injections, select Actions

Remove injection.

Specify replicate

injections

Chapter 5

Create or modify a plate setup from the Plate Manager

Additional plate settings (Plate Manager)

SeqStudio

™

Genetic Analyzer Instrument and Software User Guide

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer



















































































































































































































































Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands

Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer, User Manual

Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands